Carbon monoxide (CO) is a poisonous, colorless, odorless and tasteless gas. Exposure to carbon monoxide in the industrial workplace is most often caused by gas-powered engines; such as those found in forklifts, power washers, and heaters. Carbon Monoxide is a serious contaminant resulting from the incomplete burning of materials that contain carbon, such as natural gas, gasoline, kerosene, oil, propane, coal, or wood. It is common in crowded areas or wherever heavy equipment is in use.
OSHA Encourages Controlling Carbon Monoxide
The OSHA standard on carbon monoxide in the air is no more than 50 parts per million. If the air in a facility exceeds this amount due to combustion engines or other sources, air purification systems and respirators may be required.
Employees should be educated on the symptoms of low-level carbon monoxide poisoning so that problems can be resolved before they reach more serious levels. If people experience the sudden onset of dizziness, drowsiness, or nausea, the area should be cleared until carbon monoxide testing can be performed.
Concerns about carbon monoxide sickness must be emphasized to ensure the ongoing health of your workforce. To avoid overexposure to carbon monoxide, ensure that areas are well ventilated, especially when equipment is in operation.
Health Risks From Prolonged Exposure to CO
Carbon monoxide can cause symptoms of sickness without it being obvious that it is present in the air. Only carbon monoxide testing equipment can monitor air quality to ensure that the carbon monoxide levels are at the level that they should be. An air purification system will freshen and purify the air of contaminants like carbon monoxide.
Controlling carbon dioxide levels is critical because breathing carbon monoxide causes oxygen deprivation in vital organs. In significant concentrations, carbon monoxide can incapacitate a person within minutes, causing loss of consciousness and suffocation. Besides nausea and fatigue, some people may experience chest pain following prolonged exposure to carbon monoxide. Without treatment and air cleansing, carbon monoxide can cause death.
Carbon monoxide levels can be controlled by the installation of a CosaTron System.
CosaTron is the preferred method for controlling carbon monoxide
A CosaTron Air Purification System is used to control dangerous carbon monoxide levels and provide a steady flow of fresh recirculated air in any environment. The Series 3000 self contained units are ideal for use in confined spaces or when there is a need for additional air changes. The Series 3000 was designed specifically to work in industrial settings units to minimize these types of air quality problems.
Keywords: carbon monoxide poisoning, gas engine combustion, contaminants levels in confined spaces, industrial indoor air quality hazards, cosatron controls carbon monoxide in confined spaces, temporary air purification solution