Self Contained contamination control for data processing facilities.
The CosaTron ComputerPac Air Purification System for data centers is designed specifically for new or existing down-flow air conditioning units. Totally self contained and factory wired, it features a top loading filter section for easy access. It is available in a choice of our standard 15″ high-profile model with a 4″ V-pleated filters, or the low profile 10″ model with 1″ high efficiency, non-polarized media filter.
The air purification system for data centers is made to line up specifically with computer room air conditioners ( CRAC ) Units such as the Liebert Precison Air Handling Unit. And your choice of colors will match your ComputerPac to the existing down flow unit.
Specifically designed to control sub-micron contaminants in data processing facilities. The patented CosaTron technology also helps reduce the impact of space charge that would normally be experienced in data sites and computer rooms.
The ComputerPac is available in 2 Models:Standard High Profile Model:
Optional Accessories Include:
Remote Indicator Lamp Unit : allows operator to observe ON/OFF condition of the HV and HF generator outputs from a remote location. Also available with dirty filter lamp when used in conjunction with a differential pressure switch.
Grid Sensor Unit : provides a sensor unit, which is mounted inside the plenum attached to the HF/HV grids. Also provides a test port, external to the air unit, which provides low voltage output compatible with the CosaTron Digital Test Kit.
Remote Coupler Unit : provides the dry contacts to a remote operating panel to observe the ON/OFF condition of the HV and HF generator outputs.
Differential Pressure Switch : indicates filter pressure drop condition by switching contact state at preset differential pressure. Available with dirty filter indicator lamp.
Safety Door Switch Assembly : interrupts power to the generator whenever the plenum access door is opened. Included with the Series 1000. Order additional assemblies for all access doors within the vicinity of the grids.
- High Voltage Output……….25,000
- High Frequency Output……….650 RMS VAC nominal
- Input Voltage……….Factory wired for with 110/120 v, or 220/240 VAC; 50/60 Hz, single phase, 2 amp, 3 wire
- Input Power……….Maximum 50 watts required
Grid Assembly Specs
Grid Assembly Specifications
- Maximum Face Velocity……….850 FPM ( 4.3 MPS)
- Pressure Drop……….0.05" W.G. @ 850 FPM
- Dry Bulb Temperature
- Minimum……….50 F
- Maximum……….150 F
- Relative Humidity……….Must be below saturation. Over 85% RH requires electrical connection treatment.